JIANGSU MITTEL STEEL INDUSTRIAL LIMITED
Jiangsu Mittel Steel Industrial Limited Supply all kinds of Stainless Steel Sheet/Plate/Coil/Round ,Flat ,Angle Bar/Stainless steel Seamless pipe /welded pipe /Elbow/Flange /Galvanized Steel sheet
Add to Cart
Quick Detail:
C-276 Hastelloy plate
Material: Hastelloy C-276,C-22, C-2000, C-4, B-2, B-3 Alloy
Standard: ASTM, AMSE, DIN, JIS,GB
thickness:0.1mm-50mm
Width:500-1500mm
Length: 3m-6m or as required
Package:Standard seaworthy package(wooden boxes package,pvc package, and other request package)
Production capacity: 30 tons per month
Delivery time:15-20 days or based on order quantity
Payment terms:30% advance, balance against copy of B/L or L/C at sight.
Description:
Material: Hastelloy C-276,C-22, C-2000, C-4, B-2, B-3 Alloy
Standard: ASTM, AMSE, DIN, JIS,GB
thickness:0.1mm-50mm
Width:500-1500mm
Length: 3m-6m or as required
Package:Standard seaworthy package(wooden boxes package,pvc package, and other request package)
Production capacity: 30 tons per month
Delivery time:15-20 days or based on order quantity
Payment terms:30% advance, balance against copy of B/L or L/C at sight.
Hastelloy C-276
| UNS | Trademark | W.Nr |
| N10276 | HastelloyC276 | 2.4819 |
Hastelloy C-276 Chemical composition
| Alloy | % | Ni | Cr | Mo | Fe | W | Co | C | Mn | Si | V | P | S |
| C276 | Min. | balance | 14.5 | 15 | 4 | 3 |
|
|
|
|
|
|
|
| Max. | 16.5 | 17 | 7 | 4.5 | 2.5 | 0.01 | 1 | 0.08 | 0.35 | 0.04 | 0.03 |
Hastelloy C-276 Physical properties:
| Density | 8.9 g/cm³ |
| Melting point | 1325-1370 °C |
Hastelloy C-276 Alloy m inimum mechanical properties in the room temperature
| Alloy status | Tensile strength | Yield strength | Elongation |
| Solution treatment | 690 | 283 | 40 |
Hastelloy c275 Application range and field:
Used in nuclear industry, heat exchangers, piping system, vaporization equipments, reactors, parts and components used in furnace, ammonia nitrogen effluents radiator etc.
Applications:
Hastelloy C276 Alloy finds wide application in the chemical and petrochemical industry, for components in organic processes containing chlorides, and for catalytic systems. This material is especially suitable for use in situations where hot, contaminated mineral acids, solutions and organic acids (such as formic and acetic acid) as well as sea water are encountered.
Pulp and paper industry, e.g. for digestion and bleaching vessels
Scrubbers and special reheaters as well as wet-operating fans for combustion and flue gas desulphurisation systems
Equipment and components for sour-gas service
Reactors for acetic acid production
Sulphuric acid coolers
Methylene diphenyl isocyanate (MDI)
Manufacture and processing of technically impure phosphoric acid
Combustion-resistant alloy for high pressure oxygen applications
Chemical composition
|
| Ni | Cr | Fe | C | Mn | Si | Mo | W | Co | V | P | S |
| min(%) | bal. | 14.5 | 4.0 |
|
|
| 15.0 | 3.0 |
|
|
|
|
| max(%) | 16.5 | 7.0 | 0.01 | 1.0 | 0.08 | 17.0 | 4.5 | 2.5 | 0.35 | 0.04 | 0.03 |
Mechanical properties
|
| Condition | Yield | Tensile | Elongation(%) | Hardness(HB) |
| ASTM Min Value | Solution Annealed | 283 | 690 | 40 |
|
| Typical Values at RT | Solution Annealed | 402 | 794 | 60 | 195 |
International Specification Comparison chart
|
| Material | Round Bar | Sheet | Pipe | |
| Seamless | Welded | ||||
| ASTM | UNS | B574 | B575 | B622 | B619/B626 |
| ASME | SB574 | SB575 | SB622 | SB619/SB626 | |
| JIS | NW0276 | H4553 | H4551 | H4552 |
|
| DIN | 2.4819 | 17752 | 17750 | 17751 | 17751 |
