JIANGSU MITTEL STEEL INDUSTRIAL LIMITED
Jiangsu Mittel Steel Industrial Limited Supply all kinds of Stainless Steel Sheet/Plate/Coil/Round ,Flat ,Angle Bar/Stainless steel Seamless pipe /welded pipe /Elbow/Flange /Galvanized Steel sheet
Add to Cart
Stainless Steel Checkered Plate 304 Decorative Stainless Steel Sheet 304 checkered plate 0.5-3mm
Quick Detail:
| name | 304 stainless steel sheet | brand | BAOSTEEL TISCO POSCO JISCO |
| size | 1000mm x 2000mm 1219mm x 2438mm or as required | surface | 2B BA NO.1 NO,4 HL mirror 8k, pvc coated |
| thickness | 0.6mm - 3.0mm | certificate | SGS BV |
High temperature resistance, corrosion resistance
can work under 1200 degree temperature for long time.
Description:
Stainless Steel Checkered Plate 304 Decorative Stainless Steel Sheet 304 checkered plate 0.5-3mm
we are the agent of TISCO, we has located in wuxi city for a long time. we are special in stainless steel sheet, and we keeps about 15000 ton products in our warehouse, we have a process factory in our city. we can make some process like surface treatment . bend , cut and so on.
About our products:
1. Material: 200 series 300 series 400 series 904L duplex stainless steel.etc
2. Size: 0.3-3.0mm thickness 1000x2000mm 1219x2438mm or as required
3. Surface: 2B BA NO.4 Mirror 8K pvc coated. Other special surface treatment is available. We have a stainless steel process center in our city.
4. Brand: TISCO LISCO JISCO BAOSTEEL ZPSS.etc
5. Chemical Compostion: Ni 8% Cr 18%
6. packing: standard export seaworthy packing or as customer required.
Specification of 304 stainless steel checkered plate
1. Material: 200series&300series&400series
2. Standard: JIS, AISI, ASTM, GB, DIN, EN
3. Thickness: 0.3-100mm or as customer’s requirement
4. Width: 1500-2200mm or as customer’s requirement
5. Length: 1000-6000mm or as customer’s requirement
6. Surface: 2B, BA, No.1, etc
7. Technical processing: Hot Rolled/Cold Rolled
8. Decoration:
Mirror, No.4, HL NSP, Bead Blast, Vibration,
HL Gold, Mirror Gold, Vibration Gold NSP,
No4 Copper NSP, Mirror Copper, Bead Copper,
HL Brass, Mirror Brass, Bead Brass,
HL Black, Mirror Black, Bead Black NSP,
HL Bronz, Mirror Bronze, Vibration Bronze,
Mirror Etched, HL Etched Copper, Mirror Black Etched, Mirror Etched Gold.
Specifications:
Size: 1000x2000mm 1219x2438mm other we have coils in stock, we can cut it for any length as customer required.
Width of our mile edge coil: 1020-1050mm 1220-1265mm
thickness: 0.3-3.0mm
Mechanical property of 304 stainless steel checkered plate
| Tensile Strength | σb (MPa)≥520 |
| Offset Yield Strength | σ0.2 (MPa)≥205 |
| Elongation | δ5 (%)≥40 |
| Reduction of Area | ψ (%)≥60 |
| Hardness | ≤187HB;≤90HRB;≤200HV |
| Density(20℃,g/cm3) | 7.93 |
| Melting Point(℃) | 1398~1454 |
| Specific Heat Capacity(0~100℃,KJ·kg-1K-1) | 0.5 |
| Thermal Conductivity(W·m-1·K-1) | (100℃)16.3,(500℃)21.5 |
| Coefficient of Linear Expansion(10-6·K-1) | (0~100℃)17.2,(0~500℃)18.4 |
| Electrical Resistivity(20℃,10-6Ω·m) | 0.73 |
| Longitudinal Modulus of Elasticity(20℃,KN/mm2) | 193 |
Chemical composition of 304 stainless steel checkered plate
| 304 | C | Mn | P | S | Si | Cr | Ni |
| % | ≤0.08 | ≤2.00 | ≤0.045 | ≤0.030 | ≤1.00 | 17.5–20.0 | 8.0-11 |
Maintenance of 304 stainless steel checkered plate
(1) Regular cleaning and maintenance
(2) Pay attention to prevent the occurrence of the phenomenon of surface scratches
(3) Use soap, weak detergent or warm water to remove surface dust, dirt
(4) In addition to the surface of the binder with alcohol or an organic solvent (ether, benzene)
(5) Use neutral detergent or ammonia solution in addition to surface oil
(6) With 10% nitric acid or abrasive detergent in addition to the surface of the embroider caused by the dirt.
packing details
packing:standard export seaworthy packing or as required.
bundled wooden box or be required; The inner size of container is below: 20 ft GP:5.8m(length)x 2.13m(width)x 2.18m(high) about 24-26 CBM 40 ft GP:11.8m(length)x 2.13m(width)x 2.72m(high)about 68 CBM
