JIANGSU MITTEL STEEL INDUSTRIAL LIMITED
Jiangsu Mittel Steel Industrial Limited Supply all kinds of Stainless Steel Sheet/Plate/Coil/Round ,Flat ,Angle Bar/Stainless steel Seamless pipe /welded pipe /Elbow/Flange /Galvanized Steel sheet
Add to Cart
436L Stainless Steel Sheet 2D Finished 0.5-3mm Tickness Exaust Pipes for Auto
| standard | ASTM,AISI,GB,DIN,JIS |
| Thickness | 0.3-120mm |
| Width | 1000-2440mm |
| Length | 1000-6000mm or as required |
| Type | hot rolled/ cold rolled |
| Application | construction, decoration, machinery furniture, and so on. |
| Packing Details | standard export package or as customer's requirement. |
| Delivery Time | within 5-30 days after receiving your deposit or copy of L/C |
| Payment Terms | L/C at sight,T/T(30% in advance). |
| Surface finish | Polished &Embossed & 8k&2B,BA,2D,NO.1,NO.2,NO.4,NO.8,etc. |
| Standard | Chemical Composition | |||||||
| ASTM A240 | DIN | EN 10088-2 | JIS4305 | C% Max | Si% Max | Mn% Max | Cr% | Ni% |
| 201 |
|
| SUS201 | 0.15 | 1.00 | 7.50 | 16.00-18.00 | 3.50-5.50 |
| 202 |
|
| SUS202 | 0.15 | 1.00 | 10.00 | 17.00-19.00 | 4.00-6.00 |
| 304 | 1.4301 | X5CrNi18-10 | SUS304 | 0.08 | 1.00 | 2.00 | 18.00-20.00 | 8.00-10.50 |
| 304L | 1.4306 | X2CrNi19-11 | SUS304L | 0.03 | 1.00 | 2.00 | 18.00-20.00 | 8.00-12.00 |
| 309S | 1.4833 | X12CrNi23-13 | SUS309S | 0.08 | 1.00 | 2.00 | 22.00-24.00 | 12.00-15.00 |
| 310S | 1.4845 | X8CrNi25-21 | SUS310S | 0.08 | 1.00 | 2.00 | 24.00-26.00 | 19.00-22.00 |
| 316 | 1.4401 | X5CrNiMo17-12-2 | SUS316 | 0.08 | 1.00 | 2.00 | 16.00-18.00 | 10.00-14.00 |
| 316L | 1.4435 | X2CrNiMo17-12-2 | SUS316L | 0.03 | 1.00 | 2.00 | 16.50-18.50 | 10.00-14.00 |
| 317 | 1.4449 |
| SUS317 | 0.08 | 1.00 | 2.00 | 18.00-20.00 | 11.00-15.00 |
| 317L | 1.4438 | X2CrNiMo18-15-4 | SUS317L | 0.03 | 1.00 | 2.00 | 18.00-20.00 | 11.00-15.00 |
| 321 | 1.4541 | X6CrNiTi18-10 | SUS321 | 0.08 | 1.00 | 2.00 | 17.00-19.00 | 9.00-12.00 |
| 347 | 1.4550 | X6CrNiNb18-10 | SUS347 | 0.08 | 1.00 | 2.00 | 17.00-19.00 | 9.00-12.00 |
| 410 | 1.4006 | X12Cr13 | SUS410 | 0.15 | 1.00 | 1.00 | 11.50-13.50 | (≤0.75) |
| 420 | 1.4021 | X20Cr13 | SUS420J1 | 0.16-0.25 | 1.00 | 1.00 | 12.00-14.00 |
|
| 430 | 1.4016 | X6Cr17 | SUS430 | 0.12 | 1.00 | 1.00 | 16.00-18.00 |
|
Type 436 is a modification of Type 430 with columbium and molybdenum added to reduce the tendency of wavy lines, or roping, during forming. It has improved corrosion resistance and weldability. Automotive and appliance trims are typical applications.
| Element | 436 |
| Carbon | 0.12 |
| Chromium | 16.0-18.0 |
| Molybdenum | 0.75-1.25 |
| Manganese | 1.00 |
| Silicon | 1.00 |
| Phosphorus | 0.040 |
| Sulfur | 0.030 |
| Property | 436 |
| Yield Strength, min. (ksi) | 40 |
| Tensile Strength, min. (ksi) | 65 |
| Elongation, min. (%) | 20 |
| Hardness, max. (Rb) | 90 |
| Property | 436 Data |
| Density, lb/in3 | 0.276 |
| Modulus of Elasticity, psi | 29.0 x 106 |
| Coefficient of Thermal Expansion, 68-212˚F, /˚F | 5.6 x 10-6 |
| Thermal Conductivity, Btu/ft hr ˚F | 13.0 |
| Specific Heat, Btu/lb ˚F | 0.11 |
| Electrical Resistivity, Microohm-in | 23.6 |
| 436 |
| ASTM A240 |
| ASME SA240 |
| AMS 5503 |
Data are typical, are provided for informational purposes, and should not be construed as maximum or minimum values for specification or for final design, or for a particular use or application. The data may be revised anytime without notice. We make no representation or warranty as to its accuracy and assume no duty to update. Actual data on any particular product or material may vary from those shown herein.
