JIANGSU MITTEL STEEL INDUSTRIAL LIMITED
Jiangsu Mittel Steel Industrial Limited Supply all kinds of Stainless Steel Sheet/Plate/Coil/Round ,Flat ,Angle Bar/Stainless steel Seamless pipe /welded pipe /Elbow/Flange /Galvanized Steel sheet
Add to Cart
ASME SA240 S31803 Stainless Steel Plate BSEN 1.4462 Metal Plate 0.5-50mm Width1000-2000mm
1.TK:0.3-20mm
2.Width:1219mm, 1500mm, 2000mm
3.Best Quality and Service
ASTM duplex uns s31803 stainless steel plate
Details:
| Name | ASTM duplex uns s31803 stainless steel plate |
| Grade | 2205,unss31803,unss32304,unss32550,unss32750 |
| Finish | 2B,NO.3,NO.4,HL |
| Standard | JIS-G4305,GB/T 3280-2007,ASTM-A240/A480-07 |
| Brand | TISCO,BAO STEEL |
| Thickness | 0.3~20mm |
| Width | 1000-2000mm or as your requirement |
| Length | 1000-6000mm or as your requirement |
| Applications | Chemical industry,heat exchanger, building,constraction |
| Packing | Wooden pallet(Fumigation treatment),Standard export packaging or as per customer’s request |
| Payment terms | 30% deposit,balance payment against the copy of B/L, or 100% Irr L/C at sight |
| Delivery time | 10~15 days after the deposit by T/T or L/C |
Chemica composition:
| Grade | C | Mn | P | S | Si | Cr | Ni | Mo | N | Fe |
| UNSS31803 | 0.02 | 0.7 | 0.025 | 0.02 | 0.4 | 22.4 | 5.8 | 3.3 | 0.16 | balance |
3. Production Flow about stainless steel sheet
Raw materials are sending to hot rolling units for rolling into different sizes
4.Products photos
Stainless steel sheet
5.Surface--stainless steel sheet
| Surface Finish | Definition | Application |
| 2B | Those finished, after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster. | Medical equipment, Food industry, Construction material, Kitchen utensils. |
| BA/8K mirror | Those processed with bright heat treatment after cold rolling. | Kitchen utensils, Electric equipment, Building construction. |
| NO.3 | Those finished by polishing with No.100 to No.120 abrasives specified in JIS R6001. | Kitchen utensils, Building construction. |
| NO.4 | Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001. | Kitchen utensils, Building construction, Medical equipment. |
| Hairline | Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size. | Building Construction. |
| NO.1 | The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling. | Chemical tank, pipe. |
6.Manufacturing Process of Stainless Steel Sheet/Plate:
Raw materials are sending to hot rolling units for rolling into different sizes.
→Hot rolled material is annealing in cold rolled annealing furnace and pickling in acid.
→All mill rolls are grinded on precision grinding machine with proper chamfering after first shift operation.
→All sheets are pickled in different tanks and dried on brush roll machine before dispatched.
→These sheets are again annealing and are sent to straighten machine for straightening.
→Inspections are done at various stages. Keep proper control overall internal process via rolling, annealing and pickling by our experienced staff.
Cold rolled,annealing,pickled,slited,straightened,for stainless steel plate raw material
Stainless steel maintenance:
(1) Regular cleaning and maintenance
(2) Pay attention to prevent the occurrence of the phenomenon of surface scratches
(3) Use soap, weak detergent or warm water to remove surface dust, dirt
(4) In addition to the surface of the binder with alcohol or an organic solvent (ether, benzene)
(5) Use neutral detergent or ammonia solution in addition to surface oil
(6) With 10% nitric acid or abrasive detergent in addition to the surface of the embroider caused by the dirt.
Mill test certificate--stainless steel sheet
Application--stainless steel sheet/plate
Stainless steels of various kinds are used in thousands of applications. The following gives a flavour of the full range:
1.Domestic – cutlery, sinks, saucepans, washing machine drums, microwave oven liners, razor blades
2.Transport – exhaust systems, car trim/grilles, road tankers, ship containers, ships chemical tankers, refuse vehicles
3.Oil and Gas – platform accommodation, cable trays, subsea pipelines.
4.Medical – Surgical instruments, surgical implants, MRI scanners.
5.Food and Drink – Catering equipment, brewing, distilling, food processing.
6.Water – Water and sewage treatment, water tubing, hot water tanks.
7.General – springs, fasteners (bolts, nuts and washers), wire.
8.Chemical/Pharmaceutical – pressure vessels, process piping.
9.Architectural/Civil Engineering – cladding, handrails, door and window fittings, street furniture, structural sections,reinforcement bar, lighting columns, lintels, masonry supports
