JIANGSU MITTEL STEEL INDUSTRIAL LIMITED
Jiangsu Mittel Steel Industrial Limited Supply all kinds of Stainless Steel Sheet/Plate/Coil/Round ,Flat ,Angle Bar/Stainless steel Seamless pipe /welded pipe /Elbow/Flange /Galvanized Steel sheet
Add to Cart
304 Seamless Stainless Steel Pipe Mirror Polish Used For Milk Transport
Product Name: Mirror Polished stainless steel seamless pipe / tube / tubing
Standard: ASTM A270, A269, A312, A249 ,A554,A358,A409 ,A778,A789, A790,A928 ,
EN 10217, EN 10296,DIN 17456, DIN 17458, JISG3459, JIS G3463, JIS G3467, JIS G3448,JIS G3468
Material: TP321 SUS321 AISI321 UNS S32100 1.4541 X6CrNiTi18-10 08X18H10T,
TP316/316L/316H, 304/304L/304H, 321/321H, 317/317L, 347/347H, 309S, 310S, 2205, 2507, 904L (1.4301, 1.4306, 1.4948, 1.4401, 1.4404, 1.4571, 1.4541, 1.4833, 1.4878, 1.4550, 1.4462, 1.4438, 1.4845)
Nominal Dia: 3/8" to 80" NB for welded pipe ,Schedules: 5S, 10S, 40S, 80S, 10, 20, 30...120, 140, 160, XXS
All dimensions are in accordance with ANSI B36.19 and ANSI B36.10
Size range for tube:OD 1/4" to 80" (6mm to 2000mm),THk 0.02" to 2" (0.5mm to 50mm)
Length:20 m(Max) or as your requirement
Process: EFW (argon arc welding /TIG, plasma arc welding/PAW, and submerged arc welding/SAW)
Finish: Mirror polished, bright annealing, Annealed & pickled,
Ends: Beveled or plain end, square cut, burr free ,Plastic Cap at Both end
| 1.100% PMI,Spectro Chemical Aanlysis Test for Raw Material |
| 2.100% Dimension & Visual Examination |
| 3. Mechanical Properties Test Include Tension Test,Flaring Test (For Seamless tube/pipe)/ Flange Test (For Welded Pipe & Tube), Hardness Test ,Reversed Flattening Test |
| 4.100% Hydrostatic Test or 100% NON-DESTRUCTIVE Test (ET or UT) |
| 5.Radiographic Test for Welded Pipe (shall be accordance with specification,or shall be as agreed upon between the purchaser and vendor) |
| 6.Straightness Test (optional) |
| 7.Roughness Test (optional) |
| 8.Intergranular Corrosion Test(optional) |
| 9.Impact Test (optional) |
| 10.Grain Size Determinations (optional) |
| NOTES : ALL THE TESTS AND INSPECTION RESULT NEED TO BE SHOWED IN REPORTS ACCORDING TO STANDARD AND SPECIFICATION. |
