Precipitation Hardening Stainless Steel 15-5PH Round Bar UNS S15500 AMS5659 Steel Rod Solution Treatment
Precipitation hardening stainless steel 15-5PH steel round bar UNS S15500 AMS5659 steel bar
Wechat: wxsgms
Whatsapp: +8618068357371
Mobile: +8618068357371
| Precipitation Hardening Stainless Steel 15-5PH steel bars Similar Grade |
| W.Nr | AISI | UNS | ASTM |
| 1.4545 | 15-5PH | S15500 | S15500 |
| Precipitation Hardening Stainless Steel 15-5PH steel bars Chemical composition |
| 15-5PH | C | Si | Mn | P | S |
| 0.07max | 1.0max | 1.0max | 0.030max | 0.015max |
| Cr | Cu | Cb | Ni | Mo |
| 14.0-15.5 | 2.5-4.5 | 0.45max | 3.5-4.5 | 0.5max |
| Precipitation Hardening Stainless Steel 15-5PH Information |
| Alloy 15-5 is a precipitation hardening alloy exhibiting high strength and hardness with moderate corrosion resistance. Alloy 15-5 is a variant of the older 17-4 and 15-5 was designed to have greater toughness than S17400, especially in the through-thickness (short transverse) direction. Alloy 15-5 is used in applications that require high transverse strength and toughness such as engine parts, aircraft components, nuclear reactor components etc. |
| Precipitation Hardening Stainless Steel 15-5PH Typical Physical Property |
| Material | Condition | Ultimate Tensile Strength (ksi) | 0.2 % Yield Strength (ksi) | Elongation % in 2D | % Reduction of Area | Rockwell C Hardness |
| Alloy 15-5 PH | Cond A | - | - | - | - | 363 HB max |
| Bar AMS 5659 |
| Alloy 15-5 PH | H900 | 190 | 170 | 10 | 35 | 388-444 |
| Bar AMS 5659 |
| Alloy 15-5 PH | H925 | 170 | 155 | 10 | 38 | 375-429 |
| Bar AMS 5659 |
| Alloy 15-5 PH | H1025 | 155 | 145 | 12 | 45 | 331-401 |
| Bar AMS 5659 |
| Alloy 15-5 PH | H1075 | 145 | 125 | 13 | 45 | 311-375 |
| Bar AMS 5659 |
| Alloy 15-5 PH | H1100 | 140 | 115 | 14 | 45 | 302-363 |
| Bar AMS 5659 |
| Alloy 15-5 PH | H1150 | 135 | 105 | 16 | 50 | 277-352 |
| Bar AMS 5659 |
Produce Photo
After Processing And Before Packing
1. Chemical Compositon Inspection
2.Nondestructive Inspection
3.Metallurgical Microscope Inspection.
4.Physical Property Inspection
5.Hardness Inspection
6.Heterogeinity Of Carbides
