AISI 301 Stainless Steel Strip Full Hard DIN1.4310 Strip in Coil 1.25mm*1400mmT.S 900Mpa Min
Type
301 (UNS S 30100) is an austenitic chromium-nickel
strip coil stainless steel that can attain high tensile strength and ductility by cold-working.
301 Stainless Steel Specifications:
ASTM A240 for annealed condition
ASTM A666 for tempered material*
301 Stainless Steel Strip Coil Applications:
Kitchenware
Pots, Pans, Flatware, Counters, Sinks, Appliance components
Automotive
Trim, Moldings, Wiper parts, Fastener parts
Appliance
Dishwashers, Ovens, Refrigerators
Hardware
Hinges, Doors, Frames, Roll formed sections, Spring clips, Clamps
Food processing
Various equipment including conveyor belts
Structural parts
Aircraft, Trailer bodies, Rapid transit cars, Cargo containers
| Composition per ASTM A240 |
| Carbon | .15 Max |
| Manganese | 2.00 Max |
| Phosphorus | .045 Max |
| Sulfur | .030 Max |
| Silicon | 1.00 Max |
| Chromium | 16.00 – 18.00 |
| Nickel | 6.00 – 8.00 |
| Nitrogen | .10 Max |
| Molybdenum | |
| Mechanical Properties (Annealed, Per ASTM A240) |
| UTS | 75,000 ksi Min |
| Elongation % in 2″ | 40.00 Min |
| Rockwell Hardness | RB95.00 Max |
* Tempered mechanical properties are available upon request.
Magnetic properties:
301 stainless steel flat rolled coil is non-magnetic in the annealed condition but becomes magnetic when cold worked.
Forming:
Type 301 is used in fabrication by bending, roll forming, blanking, stretch bending and drawing. It’s high work hardening rate helps minimize wall thinning when deformed. Deep drawing may require intermediate annealing or higher nickel content.
