JIANGSU MITTEL STEEL INDUSTRIAL LIMITED
Jiangsu Mittel Steel Industrial Limited Supply all kinds of Stainless Steel Sheet/Plate/Coil/Round ,Flat ,Angle Bar/Stainless steel Seamless pipe /welded pipe /Elbow/Flange /Galvanized Steel sheet
Add to Cart
| Grades | ASTM/ASME A312, TP201, 202, 304, 304L, 316, 316L, 316Ti, 321, 347, 317, 310S, 309, 904L, 410, 420, 430, 440 A,B,C. |
| Size | 1/2" TO 48" NB & OD Both (Welded Thickness : 1MM TO 40 MM ) Seamless Thickness : Sch 10, Sch 20, Sch 30, Sch 40, Sch 60, Sch 80, Sch 160, Sch XXX |
| Type | Seamless, ERW, Welded, Fabricated, CDW MAT, Polish, BA, MIRROR FINISH |
| Form | Round, Square, Rectangle, Coil, "U" Shape, Hydraulic & Honed Tubes, Single Random, Double Random & Cut Length in Pipe & Tube |
| Length | Single Random, Double Random & Cut Length |
| End | Plain End, Beveled End, Thread End |
| Inspection, Test Reports | Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports, Destructive Test Report, Non Destructive Test Reports |
| Ni | 8.0 – 10.0 |
| C | 0.08 |
| Mn | 2.0 max |
| P | 0.045 max |
| S | 0.03 max |
| Si | 1.0 max |
| Cr | 18.0 – 20.0 |
| Density | 8.0 g/cm3 |
| Melting Point | 1400 °C (2550 °F) |
| Tensile Strength | Psi – 75000 , MPa – 515 |
| Yield Strength (0.2%Offset) | Psi – 30000 , MPa – 205 |
| Elongation | 35 % |
| Elongation | 35 % |
