JIANGSU MITTEL STEEL INDUSTRIAL LIMITED
Jiangsu Mittel Steel Industrial Limited Supply all kinds of Stainless Steel Sheet/Plate/Coil/Round ,Flat ,Angle Bar/Stainless steel Seamless pipe /welded pipe /Elbow/Flange /Galvanized Steel sheet
Add to Cart
Hastelloy® X is a high temperature and corrosion resistant nickel-based solid solution strengthened alloy. This alloy has outstanding resistance to oxidation and possesses exceptional strength at elevated temperatures. Molybdenum enables this alloy to be hard, strong, and suitable for welding applications. Alloy X exhibits good formability and machinability.
Alloy X is non-magnetic. It has high strength up to 1500ºF (816ºC) and good oxidation resistance up to 2200ºF (1204ºC). This alloy is especially resistant to carburization and nitriding, conditions which cause failure in some high temperature alloys. It is used extensively in high temperature jet engine and chemical processing applications and is highly resistant to stress corrosion cracking in petrochemical applications. Industrial furnace applications incorporate Alloy X for its resistance to oxidizing and its ability to maintain good ductility after prolonged exposure to extremely high temperatures.
Working with Alloy X nickel
Alloy X materials can be cold rolled to various tempers. It cannot be hardened through heat treating. It is easily fabricated. Alloy X maintains excellent corrosion resistance. It is readily formed by cold-working.
Machining Alloy X nickel
Nickel alloys are stronger at metal cutting temperatures than other materials. Machining of nickel alloys such as Alloy X requires tooling that minimizes cutting forces with maximum edge strength. This alloy exhibits good ductility after prolonged temperatures up to 1600°.
Purchasing Alloy X nickel in sheet, coil, round bar, and plate
We are suppliers of Alloy X nickel in sheet, coil, round bar, and plate stock in a variety of lengths and widths, and we can custom cut this material to your exact specifications. Our nickel coil can also be slit to your desired width.
Not finding what you are looking for Connect with our sourcing group at
Not finding what you are looking for? Connect with our sourcing group
Alloy X Sheet, Coil and Plate:
Alloy X Bar:
| Element | Percent by Weight | |
|---|---|---|
| C | Carbon | 0.05 - 0.15 |
| Mn | Manganese | 1.00 maximum |
| P | Phosphorus | 0.040 maximum |
| S | Sulfur | 0.030 maximum |
| Si | Silicon | 1.00 maximum |
| Cr | Chromium | 20.50 - 23.00 |
| Ni | Nickel | Balance |
| Mo | Molybdenum | 8.00 - 10.00 |
| Ti | Titanium | 0.15 maximum |
| Al | Aluminum | 0.50 maximum |
| Co | Cobalt | 0.50 - 2.50 |
| B | Boron | 0.01 maximum |
| Cu | Copper | 0.50 maximum |
| W | Tungsten | 0.20 - 1.00 |
| Fe | Iron | 17.00 - 20.00 |
| Temperature Range | Coefficients | ||
|---|---|---|---|
| °C | °F | W/m·K | Btu/(hr/ft²/in/°F) |
| 21 | 70 | 9.1 | 5.23 |
| 93 | 200 | 11.0 | 6.33 |
| 260 | 500 | 14.1 | 8.17 |
| 593 | 1100 | 20.8 | 12.0 |
| 704 | 1300 | 22.9 | 13.2 |
| 816 | 1500 | 25.0 | 14.5 |
| 927 | 1700 | 27.2 | 15.7 |
| Temperature | microhm-cm | |
|---|---|---|
| °C | °F | |
| 21 | 70 | 115.8 |
| 200 | 392 | 120 |
| 400 | 752 | 123 |
| 500 | 1112 | 127 |
| 800 | 1472 | 128 |
| 1000 | 1832 | 129 |
| Temperature | 0.2% Yield Strength | Ultimate Tensile Strength | Elongation Percent | |||
|---|---|---|---|---|---|---|
| °F | °C | psi | MPa | psi | MPa | |
| -321 | -196 | - | - | 150,200 | 1035 | 46 |
| -108 | -78 | - | - | 118,800 | 819 | 51 |
| 72 | 22 | 47,000 | 324 | 104,500 | 720 | 46 |
| 400 | 204 | 48,700 | 336 | 103,400 | 713 | 41 |
| 600 | 316 | 42,600 | 294 | 100,200 | 691 | 40 |
| 800 | 427 | 43,700 | 301 | 99,700 | 687 | 44 |
| 1000 | 538 | 41,500 | 286 | 94,000 | 648 | 45 |
| 1200 | 649 | 39,500 | 272 | 83,000 | 472 | 37 |
| 1400 | 760 | 37,800 | 261 | 63,100 | 435 | 37 |
| 1600 | 871 | 25,700 | 177 | 36,500 | 252 | 51 |
| 1800 | 982 | 16,000 | 110 | 22,500 | 155 | 45 |
| 2000 | 1093 | 8,000 | 55 | 13,000 | 90 | 40 |
| 2200 | 1204 | 3,700 | 26 | 5,400 | 37 | 31 |
