JIANGSU MITTEL STEEL INDUSTRIAL LIMITED
Jiangsu Mittel Steel Industrial Limited Supply all kinds of Stainless Steel Sheet/Plate/Coil/Round ,Flat ,Angle Bar/Stainless steel Seamless pipe /welded pipe /Elbow/Flange /Galvanized Steel sheet
Add to Cart
Specifications for 16Mo3 Sheets & Plates. If any specification is not mentioned here, please use the contact button for quick quote.
| Specifications | ASTM A204 / ASME SA204 |
| Standard | AISI, ASTM, BS, DIN, GB, JIS |
| Thickness | 4.0mm – 100mm |
| Specialize | Shim Sheet, Perforated Sheet, B. Q. Profile. |
| Length | 1000-12000 mm |
| Form | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) |
| Finish | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
| Grade | ASTM A204 16MO3 |
| Grade | min | max |
|---|---|---|
| C | 0.12 | 0.2 |
| Cu | – | 0.30 |
| N | – | 0.012 |
| Mn | 0.40 | 0.90 |
| Mo | 0.25 | 0.35 |
| P | – | 0.025 |
| Si | – | 0.35 |
| S | – | 0.01 |
| Cr | – | 0.30 |
| Ni | – | 0.30 |
| Properties | 16Mo3 |
| Tensile Strength (Mpa) | 440-590 |
| Yield Strength (Mpa) | 220-275 |
| Elongation in 100-150 mm(%) | 19 |
| Elongation in 16 mm(%) | 24 |
| Max Thickness (mm) | 250 |
| Shear Modulus | 79.3 GPa |
| STANDARD | 16Mo3 |
|---|---|
| WERKSTOFF NR. | 1.5415 |
| UNS | – |
| JIS | JIS G3115 |
| EN | EN10028 |
| BS | 1503-243B |
| GOST | – |
