JIANGSU MITTEL STEEL INDUSTRIAL LIMITED
Jiangsu Mittel Steel Industrial Limited Supply all kinds of Stainless Steel Sheet/Plate/Coil/Round ,Flat ,Angle Bar/Stainless steel Seamless pipe /welded pipe /Elbow/Flange /Galvanized Steel sheet
Add to Cart
Alloy A330 UNS N08330 is a iron-nickel-chromium based, austenitic superalloy. It is one of the most popular alloy developed to provide excellent resistance to carburizing and oxidizing atmospheres at elevated temperatures. With a nickel content between 34%-37% and presence chromium provides this superalloy excellent resistance to both oxidation and carburization from the precipitation of sigma phase.
The alloy does not get affected under cyclic conditions of heating and cooling and in alternate carburizing and oxidizing atmospheres. 330 nickel cobalt alloy is available in a variety of forms, including Seamless & welded pipe, Seamless & welded tube, Bar, Wire, Sheet, Plate, Forgings, Pipe fittings, and Flanges.etc.
Applications of Alloy 330 are in industries including
The chemical composition of INCOLOY alloy 330 is given in the following table.
| Element | Content (%) |
|---|---|
| Iron, Fe | 43 |
| Nickel, Ni | 34-37 |
| Chromium, Cr | 17-20 |
| Manganese, Mn | ≤2 |
| Others | Remainder |
The following table discusses the physical properties of INCOLOY alloy 330.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 8.08 gm/cm3 | 0.292 lb/in3 |
| Incoloy 330 Melting Point |
The mechanical properties of INCOLOY alloy 330 are tabulated below.
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength(annealed) | 600 MPa | 87 ksi |
| Yield strength(annealed) | 280 MPa | 40.6 ksi |
| Elongation at Break | 45% | 45% |
Alloy 330 UNS N08330 nickel cobalt alloy in a variety of forms, including:
Some of the designations used to denote INCOLOY alloy 330 are listed below:
| UNS N08330 | SAE AMS 5592 | SAE AMS 5716 | SAE J405 | SAE J412 |
| ASTM B 511 | ASTM B 512 | ASTM B 535 | ASTM B536 | ASTM B546 |
| ASTM B710 | ASME SB-511 | ASME SB-536 | ASME SB-710 |
Q1: How can we get the sample?
A1: Free samples are available for your checking and testing.But you need to pay for the frieght cost.
Q2: Can you provide Mill Test Certificate?
A2: Yes! The Mill Test Certificate will be issued with the product.
Q3:Packing details?
A3:Packaged 25 Tons per 20 GP wooden case container.
20ft GP: 5898mm(Length)x2352mm(Width)x2393mm(High)
40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High)
40ft HC: 12032mm(Lengh)x2352mm(Width)x2698mm(High)
Q4:What is your terms of payment?
A4: 100% T/T advance.
30% T/T and balance against copy of documents.
30% T/T advance, balance L/C at sight.
Q5:Can we visit your factory?
A5: Warmly welcome. Once we have your schedule, we will arrange the professional sales team to follow up your case.